CareCo DL08146 Usage And Maintenance Instructions Download Page 3

Page: 3 / 12

www.careco.co.uk

CareCo, Hubert Road, Brentwood, Essex, CM14 4JE

Digi Blood Pressure Monitor -

DL08146

Symbol Descriptions

To assure the correct use of the product, basic safety measures should always be followed.

The following symbols may appear in this manual, on the label, on the device, or on it’s accessories.

Some of the symbols represent standards and compliances associated with the device and its use.

WARNING: This alert identifies hazards that may cause serious personal injury or death.

CAUTION: This alert identifies hazards that may cause minor personal injury, product damage, or

property damage.

Type BF applied part.

Specifies serial number.

CE Mark: conforms to essential requirements of the Medical Device Directive 93/42/EEC

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste

separately for special treatment is necessary.
Direct current.
CAUTION: Consult accompanying documents.

This alert identifies protection grade. The first “2” means this device can protected against

solid foreign objects which diameter over 12mm, length below 80mm. The second number “O”

indicates non-protected against the ingress of water.
Follow instructions for use.

Operating Instructions.

Keep Dry.

IP20

Summary of Contents for DL08146












