www.careco.co.uk
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
11
How to set
Measurement
Pre-measurement
Digi Blood Pressure Monitor -
DL08146
• Keep quiet for 5-10 minutes, and avoid eating, drinking alcohol, smoking, exercising and bathing
before taking measurement. All these factors will influence the measurement result.
• Remove any garment that fits closely to your upper arm.
• Always measure on the same arm (normally left).
• Take measurement regularly at the same time of every day,as blood pressure changes even during
the day.
Start to year:
Press button when you power on , the year will be flashing, and then use button to set year, press
button to confirm the year.
Month and date setting
Continuing on from above step, the screen will display MONTH-DAY and XX-xx, and keep flashing on
month, the digit will increase 1 when press button each time, you can choose from 1 to 12. Press
button to confirm the month, then it will set the date. Same as the month setting, each time you press
button , the digit will keep changing from 01 to 31. Press button when you confirm the date, then it
will enter into the time setting mode.
Time Setting
Continuing on from above, the screen will display TIME and XX: XX, and keep flashing on the digits of
hour, the digit will increase 1 when press button each time, you can choose from 0 to 23. Press button
to confirm the hour, then the digits of minute start to flash , same as the hour setting , each time you
press button the digits will keep changing from 00 to 59. Press button to confirm the minute, then
the total setting mode is completed.
Unit Setting
Continuing on from above,the unit will be changed when press button each time. Press button to
confirm the unit, then it will enter into the user setting mode.
M
M
M
M
M
M
M
M
