.
1. LCD
2. BUTTON
3. BATTERY COMPARTMENT
【
BUTTONS
】
MODE
：
Each time pressing it. Monitor will switch to next mode. During training, press the button to scan
each display function.
RESET
：
Keep pressing it for 2seconds to reset the computer back to the main menu as Total Reset.
【
FUNCTION LIST
】
1. TIME: Display range (0:00 ~ 99:59 ); Count up workout time by cycle.
2. DISTANCE: Display range( 0 ~ 99.99meters);Count up workout distance by cycle.
DISTANCE & SPM will switch to display in every 5 seconds.
3. SPM: Display range( 0 ~ 999). In START mode, when there is sensor input, LCD will display the value in
3 seconds; without sensor input, LCD display “0” in 4.6seconds.
DISTANCE & SPM will switch to display in every 5 seconds.
4. CALORIES: Display range(0Cal ~999Cal); Count up calories consumption by cycle.
CALORIES & PULSE will switch to display in every 5 seconds.
5. STROKES: Display range (0~9999 strokes). STROKES & TOTAL STROKES will switch to display in
every 5 seconds.
6. TOTAL STROKES: Accumulates total strokes from 0 up to 9999. It cannot be cleared to 0.
STROKES & TOTAL STROKES will switch to display in every 5 seconds.
7. QUICK START: In Standby Mode,with SPM signal been transmitted into the console,the console will
QUICK START
POWER ON
After power on ,the LCD will display all segments for 2 sec (
Figure
1),meanwhile the console will be long
beep 2 sec,then enter SLEEP Mode.
GB
1
2
3
Summary of Contents for Mag Flyer KS
Page 35: ......
