CARDIOSTRONG CST-TX40E, Assembly And Operating Instructions Manual

Page: 24 / 64

TX 40e
24
1. Press eFOLD UP for two to three seconds to start the folding process. You can hear a
beep every two to three seconds meanwhile. It will stop once folding is done.
2. Press eFOLD DOWN for two to three seconds to start the unfolding process. You
can hear a beep every two to three seconds meanwhile. It will stop once unfolding is
done.
NOTE:
- eFOLD only works in standby mode, without motor operation.
- You will hear a beeping sound every two to three seconds meanwhile and this will
first stop when the treadmill is in the corresponding position.
- If there is a power failure during this, it must be restarted and done in standby mode.
- If an emergency occurs, please press STOP or remove the safety key in order to
immediately stop the eFOLD function.
1. Make sure there is enough space to set up the
treadmill when it is unfolded.
2. Keep an open space of 100 cm from furniture
or a wall in front of the treadmill.