CARDIOSTRONG CST-TX40E Assembly And Operating Instructions Manual Download | Manualshive

Page: 16 / 64

background image

TX

40e

16

2.4

Care and maintenance

Belt tension

The belt must be tensioned if it slips during usage. Your treadmill is equipped with

tension bolts that can be reached from the back of the treadmill. Before you tension

the belt, start the treadmill and set the speed to 4.8 km/h (3 mph). With the help of a

6 mm Allen key, which is included in the hardware bag, turn the right and left tension

bolts a half rotation clockwise.

Once you have set both sides with a half rotation, test the treadmill to see if it slips any

more. If it still slips, repeat the step and test it again.

If you turn one side more than the other, the belt will drift off the side and must be

centered /aligned again. Do NOT tighten MORE THAN two full rotations on each side.

If it still slips, please contact your contract partner.

NOTE:

An over-tensioning of the belt may cause unnecessary friction and wear on the

belt, motor and electronic system.

Aligning the running mat

Make sure that the running mat is always centered on your treadmill. The running

style and uneven floors are two things that may cause a drifting of the running mat.

Small adjustments to the bolts (on the back of the treadmill) are required if the belt

moves away from the center.

1. Press “START” and increase the speed of the treadmill to 4.8 km/h (3 mph).

2. Stand behind the treadmill in order to determine which direction it moves away

from.

3. If the belt drifts off to the left, turn the left adjusting bolt 1/4 clockwise and the right

adjusting bolt 1/4 counterclockwise (see figure 1).

4. If the belt drifts off to the right, turn the left adjusting bolt 1/4 counterclockwise and

the right adjusting bolt 1/4 clockwise (see figure 2).

5. Watch the belt run for about two minutes. Repeat steps 3 to 5 if necessary.

«
...
14
15
16
17
18
...
»

Summary of Contents for CST-TX40E

































































Reviews:

No comments

Related manuals for CST-TX40E

Brand: LIFESTYLER Pages: 18

Brand: Technogym Pages: 23

Brand: Xterra Pages: 22

Anti-Gravity M320 Stride Smart

Brand: AlterG Pages: 34

585 TL PETL42561

Brand: ProForm Pages: 10

Brand: ProForm Pages: 26

Brand: ProForm Pages: 28

615 T Treadmill

Brand: ProForm Pages: 32

Brand: Weslo Pages: 16

Brand: Pro-Form Pages: 27

Brand: Klarfit Pages: 96

Brand: Edurance Pages: 44

M-7 SERIES E TYPE

Brand: CIRCLE FITNESS Pages: 25

Brand: Freemotion Pages: 40

Brand: Darwin Pages: 50

Brand: Ironman Fitness Pages: 42

Brand: Abilica Pages: 50

Brand: ICON Health & Fitness Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands