CARDIOSTRONG CST-EX9, Assembly And Operating Instructions Manual

Page: 15 / 44

EX 90
15
Step 7: Assembly of the console and adjusting the supporting feet
(1) Loosen the four pre-mounted screws (G1) from the
console (G).
(2) Connect the console cables (D1 and D2) and the
heart rate cables (D3) from the console mast with the
console.
Note: Make sure that the cables are properly
connected with each other. Slide the excess cable into
the casing and the console mast (D).
(3) Mount the console (G) on the console mast (D) with
the four screws (G1).
(4) Use the adjusting screws under the side parts in
order to level out the unevenness in the floor.
Step 8: Locking the pedal bars (B1 and B2)
The pedal bars should always be
locked, when the equipment is not
in use.
To do this, turn the knob (A3) to the
“LOCK” position in order to lock the
pedal bars (B1 and B2) and to avoid
possible injuries.
Note: Never lock the pedal bars, when
the equipment is still moving, but only
when the equipment has come to a
complete standstill.