CARDIOSTRONG CST-EX40-BG, Assembly And Operating Instructions Manual

Page: 14 / 48

EX 40
14
Step 2: Assembly of the front supporting foot
First remove the screws (D7),
washers (D8), spring washers
(D9) and nuts (D10) from the
rear supporting foot (D). Put the
screws (D7) through the front
supporting foot (D) and the
bracket on the frame (A). Then
secure the supporting foot with
two washers (D8), two spring
washers (D9) and two nuts (D10).
Stabilize the equipment:
If the equipment is not stable after assembly (after
Step 2), make adjustments to the adjusting screws
underneath the supporting foot (C2) accordingly.
Step 3: Assembly of the console mast
(1) With the assistance of a second person, lift the
frame (A) and remove the foam packaging (4).
(2) Fix the connection masts (D and E) to the frame
(A) with seven respective screws (J1), spring washers
(J16) and washers (J2).
(3) Tighten all of the screws.
Warning: Take care that the cable does not get
pinched when you push the parts together.