CARDIOSTRONG BX40, Assembly And Operating Instructions Manual

Page: 15 / 40

15
Step 2: Assembly of handle, console and saddle
1. Place the handle (3) on the console mast (2) and mount it with the quick release lever (19). Insert
the hand pulse sensor cable (82) from the handle through the cable sleeve (88) and pull it up
through the opening in the console mast (2).
2. Connect the console cable (80) and the hand pulse sensor cable (82) with the console (48).
Mount the console (48) on the console mast (2) with four M5x12L cross-headed screws (41) and
the Phillips screwdriver (43).
3. Use the 13mm/15mm Allen wrench (79) to mount the pedals (15 L+R) on the pedal crank. The
right pedal must be screwed tight clockwise and the left one counterclockwise.
4. Loosen the pre-mounted screws and washers under the seat (20). Place the mounting bracket
under the seat and mount the parts with the previously loosened nuts and washers (three
M8x7T nuts and three 8x20x1.5T washers) and a 13/14 mm wrench.
5. Move the seat (20) on to the seat bracket (7) and use the 14/15 mm wrench (79) in order to
mount the seat with the nuts.
6. Insert a screw (71) through the seat (20) and the seat rail (6) and mount it with one 3/8”x30x2T
washer and 1x resistance knob (52).