xr 600
17
7.
MAINTENANCE INSTRUCTIONS
User or person in charge of machine maintenance can only carry out procedures as follows:
7.1.
Outer cleaning
Clean the machine and the console only with wet cloth. Do not use solvents. Before cleaning make sure the
plug is disconnected.
7.2.
Belt
If machine is not utilized for a long time, loose the belt tension with screws on the rear part of the machine
(see point 3.11 best running belt tension).
7.3.
Lubrication
Control the wooden board below the belt is well lubricated. The machine has a self-lubricating system (see
5.3 extraordinary lubrication) that spray oil to the belt every time the treadmill is powered up (do not turn
on it more than 2 times per day). One time per year check oil into the spray can and, if it is necessary,
substitute it with a new one. Every 250 km (value modified from SetUp), at turning on, the machine will go
down four times spraying oil for special belt lubrication.
Use only vaseline spray oil can.
7.4.
Oil can substitution
(See 5.4 oil can substitution).
7.5.
Belt tension
(See 3.11 best running belt tension).
7.6.
Routine service instructions
People that make routine service to the machine do not need particular skills. They only must read the
manual to get all instructions and warnings. Do not repair or change by yourselves damaged or broken parts.
Please contact the constructor (See chapter 1 Recapitulation of machine marking data).
