xr 600
4
3.
IMPORTANT SAFETY INSTRUCTIONS
3.1.
Uncorrect or unforeseen use
The treadmill needs to have particular attention to EMC (Electromagnetic Compatibility) and must be
installed in conformity to EMC info as follows. Mobile phones can disturb the correct functioning of MD. The
treadmill cannot be turned on without or unconnected safety devices (protection covers, emergency stop,
etc …) because of electric risks. The treadmill must be used only in levelled position to avoid crushing or
capsizing risks.
Before turning on the Medical Device read entirely the following suggestions checking that being satisfied all
following conditions:
Please read this manual completely before turning on the treadmill in order to allow a safety using.
The machine must operate in stable or levelled position otherwise the belt could have uncontrolled
shifts.
Neither touch nor put the hands near the moving parts of operating machine.
Use the side handles only at the beginning or at the end of use or when you push the red Stop
button or Stop key.
Do not turn on the machine near children or pets.
The machine can be used by one user only at a time.
Properly dress and suitable shoes are suggested during utilization. Be careful of shoes with strings,
scarfs, etc... because they could be dangerous for user.
Neither tread nor brake with your feet when the machine is functioning but walk or run following
the speed of the belt.
Do not use the machine in the garden or in a damp environment.
In case of troubles, please contact the authorized dealer or manufacturer. Not authorized repairing
attempts make guarantee invalid.
Take off the plug before starting any maintenance or assembling operation.
Do not clean the belt under running water.
In case of vertigo, sick or other abnormal symptoms during the use, stop the training and consult a
doctor before continuing.
At the end of the training let your body rest until heart-beats are normal again. NEVER stop suddenly
but gradually slow down.
The handbook shall always be available near the machine to be consulted by user.
Make sure there are required spaces to reach and handle the machine, for maintenance and
cleaning as well; do not put the motor close to heat sources and let it receive a steady ventilation.