Cardioline XR450R, User Manual

Page: 18 / 26

xr 600
5.
SOFTWARE
13
5) Click on “ TREADMILL Basic Setting ” to see and set up the values.
Once values are set up, click on “ Write Basic Machine Setup ” to send to the machine the values just modified.
With this software it’s possible to change/set up the following values:

Total (km): see the total km of machine;

Partial (km): see the km made from last extraordinary lubrication;

Partial Value Setting (km): see / set up the km when the treadmill must make the extraordinary
lubrication;

Pumps number to change oil can: Pumps number after that the oil can alarm turns on;

Extraordinary lubrification pumps number: Number of oil pumps during the extraordinary lubrication;

Starting Inclination: It’s possible to change the starting inclination value;

Delta Inclination: Inclination increment pushing “ + inclination” key;

Enable WiFi connection (RunnerConnect): This feature is not available;

Enable RS232 connection (RunnerConnect): Enable/Un-enable the RS232 connection by cable;

Last Extraordinary Lub. (km): see the km when the treadmill made last extraordinary lubrication;

Oil can pumps number: see / reset the oil can pumps number (one every turning on operation);

Maximum Speed: It’s possible to change the machine maximum speed;

Maximum Inclination: It’s possible to change the machine maximum inclination;

Minimum Inclination: It’s possible to change the machine minimum inclination;

Imput Protocol Name: It’s possible to set up the machine protocol;

Serial Speed: It’s possible to set up the serial communication speed;

Serial Delay (ms): It’s possible to set up the serial commands delay;

Unit of measurement speed: It’s possible to change the unit of measurement speed (kmh or mph).