background image

 

7

THANK YOU FOR BUYING CARDIOLINE!. 

Your new computerised 

electrocardiograph CARDIOLINE® has been designed and built in 
compliance with the applicable regulations in force at the time when et 

medical devices SpA, Cavareno (Trento) - ITALY drew up this manual. et 

medical devices operates in accordance with the requirements for quality 

management systems defined by EN ISO 9001: 2000 and EN ISO 13485: 

2003 standards. The system is covered by a Nemko Certification AS (Cert. 

N. 800278). Your new electrocardiograph has also been built in compliance 
with the Medical Device Directive 93/42/EEC and is therefore marked by the 

relevant CE0470 mark. 

1.1 How to read the manual 

In order to ensure the 

CARDIOLINE

®

 ar1200view

 is operated in a safe 

and correct manner, and to appreciate its ease of use and high reliability, 

the user instructions must be read carefully

.

 

This documentation describes the functions of your electrocardiograph 
including those provided by all the possible "options" available. It is 

therefore possible that some of the functions described may not be present 

in the model you have purchased. For details of the options, consult the 

"firmware configuration" chart that accompanies each individual appliance. 

 This symbol allows you to identify the functions 

not

 provided on all 

models, which must be requested specifically at the time of purchase. 

 This symbol allows you to identify the functional, behavioural and 

operational aspects that may be conditioned by the type of configuration 

selected during the step of 

“Preparation for use: the menu”

SMB

 When a given key is depicted in the body of a sentence or a 

paragraph, 

press

 the corresponding key on the device to perform the action. 

The structure of this manual allows you to approach the use of the 
electrocardiograph according to your level of knowledge. If you have already 

had experience with 

CARDIOLINE

®

 equipment, the initial fast-track part of 

each paragraph will allow you to begin working immediately. In the 

continuation of the paragraph, on the other hand, the single aspects of 

operation are discussed in more depth.

 

The manual gives detailed information on the use of the model 

ar1200view

 

in traditional ECG procedures, and an introduction to the use of particular 

functionalities involving interaction with software and a Personal Computer. 

For instructions on the use of the software applications for Personal 

Computer, consult the special online guides. 

The quick guide to the electrocardiograph (at power-up the display shows 

Summary of Contents for ar1200view

























































Reviews: