8528-00412-0M Rev A
PZ30W / PZ60W O
wner’s
5
SELECTING THE SCALE BASE
’S CHANNEL
To select the scale base
’s channel, first turn off the scale base and wireless display units.
Then use the dip switch, which is located on the bottom of the scale base under the rubber
stopper. The dip switch has four switches marked (1, 2, 3 and 4). Switch-4 is not active;
only 3 channels are available for use. To select a channel, move the switch
toward the ‘ON’
mark (see illustration shown below).
For example: To select Channel-1 for the scale, move Switch-
1 towards the ‘ON’ mark.
After selecting the channel, turn on the scale base first, then the wireless display.
The dip switch is on the bottom of the scale base under the rubber stopper.
Channel 1
Channel 2
Channel 3
