background image

8528-00412-0M Rev A 

 PZ30W / PZ60W O

wner’s 

OPERATION 

Push Button Tare Function 

The Tare Function allows the user to zero the scale to cancel out the weight of a container, 
thus giving the NET weight of the item being weighed.   

  Press the ON/OFF button to turn on the scale. 

  Place the container on the scale platform. 

 

Press the ‘TARE’ button after the weight stabilizes and stable sign displays.   

 

The display will reset to ‘0’. 

  Place the item to be weighed on the platform 

(without removing the ‘tared’ container). 

  Scale will display NET weight of item being weighed. 

 
 

Touch Free Tare Function 

This scale is equipped with 

‘photo eye’ sensor for a Touch Free Tare function. Simply pass 

your hand over the sensor and the scale will tare the weight. 

  Place the container to be tared on the scale platform. 

  Pass your hand over the 

  sensor on the display. 

  The display will rese

t to ‘0’. 

  Place the item to be weighed on the scale platform.   

 
To reset the ‘TARE’ to zero, remove all items and the tared container from the platform and 
then 

press the ‘TARE’ button, or pass your hand over the sensor. 

 
 

Hold Weight Function 

The 

‘HOLD’ function may be used to lock the weight on the display, even after the load is 

removed from the platform. To use the hold function, press the 

‘HOLD’ button. A small 

triangle will appear flashing in the upper left corner of the display below to the word 

‘HOLD’ 

indicating the hold function is active. This triangle and the hold function will remain active 
until the 

‘HOLD’ button is pressed again canceling the hold function and turning off the 

triangle on the display. 
 

NOTE:

 When the scale is turned off, the 

‘HOLD’ function is cancelled. When the scale is 

turned on again, it will be in the normal operating mode. 
 

  Press the 

‘HOLD’ button. 

  Place a load on the platform. When the weight is locked in, the triangle will stop 

flashing. When the load is removed from the platform, the display will continue to 
show the weight.   

  Press the 

‘HOLD’ button again to revert to the normal operating mode.   

  You can also press the 

‘TARE’ button or use the Touch Free Tare sensor to revert to 

normal operating mode. 

Summary of Contents for PZ30W

















Reviews: