8
MEMORIZZAZIONE CODICE TX-TX
TRQ504
29-10-2013
DM0910
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
MR
A
MR
B
1
2
3
MEMORIZZAZIONE CODICE TX-TX
TXQ504C4
29-10-2013
DM0911
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
A
MEMORIZZAZIONE CODICE TX-TX
TXQ504C4
29-10-2013
DM0912
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
B
• Memorizzazione rapida
Questa procedura consiste nell'abilitazione di un nuovo trasmettitore da postazione remota mediante l'ausilio di un
altro trasmettitore già memorizzato nell'impianto. Non essendo richiesta la presenza di ricevitori questa procedura può
avvenire in qualsiasi luogo lontano dall'impianto (per esempio nel vostro punto vendita di fiducia).
L'abilitazione alla procedura di "memorizzazione rapida" viene abilitata o disabilitata sul ricevitore tramite
l’inserimento/disinserimento del jumper R.MEMO:
• Jumper
R.MEMO
inserito: memorizzazione rapida abilitata
• Jumper
R.MEMO
disinserito: memorizzazione rapida disabilitata.
- Togliere il guscio superiore dei trasmettitori da memorizzare e di quello già memorizzato facendo leva come indicato in
figura (dett. a).
- Affiancare il trasmettitore
A
, già memorizzato sul ricevitore, al trasmettitore nuovo
B
(dett. b).
- Con un adeguato oggetto appuntito premere e rilasciare il tasto
MR
sui due trasmettitori (in sequenza o simultaneamente).
- I led arancione dei due trasmettitori lampeggiano lentamente.
- Premere e rilasciare sul trasmettitore
A
un tasto di canale già attivo sul ricevitore (dett. c).
- Il led del nuovo trasmettitore
B
rimane acceso per 3 secondi per confermare la memorizzazione (dett. d).
Il trasmettitore
B
è abilitato al comando del ricevitore esattamente come il trasmettitore
A
.
3
Summary of Contents for RPQ S504 Series
Page 55: ...55 Notes...