18
ANWEISUNGEN
Bevor mit der Installation begonnen wird, sollte das vorliegende Heft aufmerksam gelesen werden,
insbesondere sollten die vom Produkt vorgesehenen Sicherheitseinrichtungen zwecks bester Effi-
zienz in Augenschein genommen wird.
Im vorliegenden Heft werden nicht alle von der rechtskräftigen italienischen oder ausländischen
Normen eventuell vorgeschriebenen Sicherheitseinrichtungen in Betracht gezogen. Der Installa-
teur muß persönlich dafür sorgen, daß die fehlenden Einrichtungen hinzugefügt werden und sie
den im vorliegenden Heft beschriebenen Produkten vorgeschaltet oder nachgeschaltet installie-
ren.
Die Verwendung der Produkte und ihre Zweckbestimmung zu einem anderen Gebrauch, als es
vorgesehen und/oder geraten wurde, ist nicht vom Hersteller erprobt worden. Die Installations-
arbeiten erfolgen daher unter der vollständigen Verantwortung des Installateurs. Den vorliegende
Handbuch wendet sich an Personen, die zur Installation von “
ELEKTROGERÄTEN
“ befähigt sind
und setz eine gute berufliche Kenntnis der Technik voraus. Der Hersteller lehnt jede Verantwortung
für eventuelle Schäden ab, die durch die fehlende Beachtung der zur Zeit geltenden Sicherheits-
normen bei der Installation entstanden sind.
Beschreibung
- Die Elektronik ist zusammengesetz aus einer Träger-Leiterplatine mit herausnehmbar Logikkarte,
die über einen Zwangskupplungsanschluß eingeführt wird.
- Außengehäuse aus ABS mit einflügeliger Tür, die in Gelenken aus Chromstahl befestigt ist (Öffnung
180°). Schutzdichtung in geschlossenem Zustand (
IP55
).
- Schließung der Tür mittels Schlüssel mit Sicherheitsblockierung.
- Gehäuse mit Möglichkeiten zur Wandbefestigung
- Eingang der Kabel über Kabelklemmen
- Anschlüsse an sichere Niedrigstspannung
- Vorbereitet zur Einsetzung der Funkempfängerkarte
- Drucktasten außen auf der Tür (extra)
Installationsanleitungen
Technische Daten
Dreiphasen-Stromversorgung
Vac
400V3~
Frequenz
Hz
50-60
Motoren
Nr.
1
Max. Leistung Dreiphasenmotor
W
2200
Kurzschluß-Strom mit Schmelzsicherung
Amp.Zeit<300 ms
20
Nennstrom
Amp
5
Betriebstemperatur
°C
-20…+55
Schutzgrad
IP
55
Schutzgrad mit Tasten
IP
54
Feuerschutzgrad
UL94
V0
Die Zentrale ist mit Rohrklemmen zur Einführung von Rohren
(Ø16 mm) ausgestatet.
Der Satz PRG384 beinhaltet:
- Den Programmierer PRG384
- Eine Reihe Schrauben zur Montage an der Wand
- 2 Schlüssel
- Die Betriebsanleitung
Positionierung
Die Anbringstelle der Apparatur an Hand der Typologie und der Eigenschaften der Anlage wählen. Die
Anbringstelle der Apparatur sollte folgenden Anforderungen gerecht werden:
- Geschützt vor Stößen und Beschädigungen
- Genügender Abstand vom Boden, um vor Hochwasser geschützt zu sein
- An einer für den Techniker zwecks Wartung leicht zugänglichen Stelle.
DEUTSCH
DEUTSCH