70-01124-02 C
5
AED Training Device Overview
AED Training Device Remote Control Functions
The remote control has the following functions:
Table 1: AED Training Device Remote Buttons
Button
Use
1:
•
Shock cancelled
•
Press while the trainer prompts, “Shock Advised” to
change the prompt to, “Rhythm changed. Shock
cancelled.”
•
Press during
Place Pads
prompts to forward to the
Analysis
prompts. The next sequence (
Shock
or
CPR
)
is determined by the selected scenario.
•
Press during a
CPR
sequence to forward to the
Analysis
prompts, followed by another
CPR
sequence.
2:
•
Shock advised
•
Press during
Place Pads
prompts to forward to the
Analysis
prompts. The next sequence (
Shock
or
CPR
)
is determined by the selected scenario.
•
Press during a
CPR
sequence to forward to the
Analysis
prompts followed by a
Shock
sequence.
3:
•
Check pads
•
Press during analysis to prompt, “Press pads firmly to
patient’s bare chest.”
•
Press again to continue the scenario.
4:
•
Place pads
After the prompt, “Remove white square package from lid
of AED,” press to prompt:
•
“Peel one of the white pads completely from blue
plastic”
•
“Firmly place the pad on the patient”
•
“Next, peel second white pad from the blue plastic”
•
“Firmly place the second pad on other location.”
Note:
Press to advance through the prompts more
quickly.
