70-01124-02 C
10
Powerheart® G5 AED Training Device User’s Guide
Typical Rescue Scenario
The following steps demonstrate a typical rescue scenario. Once the AED
Training Device is set and the lid is opened, the AED Training Device
advances through the complete scenario. The instructor may speed up the
scenario if required.
1.
Open the lid of the AED Training Device. The AED Training Device
prompts, “Stay calm and follow these instructions” and ensure that
Emergency services are called now.
2.
Press
4
on the remote to advance through the pad placement prompts:
Note:
The prompts below are provided when the Standard Prompt level is
selected.
•
“Tear open white package across dotted line and remove pads”.
•
“Peel one of the white pads completely from the blue plastic”.
•
“Firmly place the pads without the blue plastic on patients bare chest
exactly as shown on the pads”.
•
“Next, peel the second white pad from the blue plastic”.
•
“Firmly place the second pad on the other location exactly as shown
on the pads”.
3.
Press
4
again to indicate pad placement.
4.
The AED Training Device advances to the analysis stage of the rescue
sequence and prompts, “Do not touch patient. Analyzing rhythm.”
5.
If a shockable rhythm is selected, the AED Training Device prompts,
“Shock Advised.”
6.
Next, follow these steps to deliver a simulated shock:
Note:
Following steps are applicable only for Semi-automatic mode.
a.
The AED Training Device prompts, “Press red flashing button to
deliver Shock.”
b.
The student presses the Shock button to deliver the first simulated
defibrillation.
