70-01124-02 C
6
Powerheart® G5 AED Training Device User’s Guide
5:
•
Analysis
interrupted
•
Press during
Analysis
prompts to prompt, “Analysis
interrupted. Stop patient motion.”
•
Press again to continue.
6:
•
Battery low
•
Press during a rescue scenario to prompt, “Battery low”
(the battery LEDs will also show low battery).
•
Press again to turn off the low battery LED and turn on
two green battery LEDs.
7:
•
Service required
•
Press to prompt, “Service required.”
•
Press again to continue.
8:
•
Pause
•
Resume
•
Press at any time to pause (the AED Training Device
beeps while paused).
•
Press again to continue.
Note:
If the device is already in Pause mode because a
scenario sequence finished, the AED Training
Device restarts.
9:
•
Change scenario
•
Change volume
•
Press
#
then
1
to start Scenario 1.
•
Press
#
then
2
to start Scenario 2.
•
Press
#
then
3
to start Scenario 3.
•
Press
#
then
4
to start Scenario 4.
•
Press
#
then
7
to decrease volume.
•
Press
#
then
8
to increase volume.
Table 1: AED Training Device Remote Buttons (continued)
Button
Use
