Carbine PLUS-4500, User & Installation Manual

Page: 11 / 20

11
Step 6: Transmitter Programming
Plug In the Power
Harness
The siren will start sounding, the
parking lights will flash and the LED
will begin flashing
OFF
ON
OFF
ON
Make Sure the
Valet/Override Switch is
in the “Off” Position
S t e p 1 S t e p 2
ON
S t e p 3
Turn On Ignition
Switch the Valet Switch
On then Off 1 Time
The siren will stop sounding, the
parking lights will stop flashing
S t e p 4
Switch the Valet Switch
On then Off 2 Times
The siren will chirp 1 time. You are
now in the transmitter code
programming mode. The LED will be a
solid RED
S t e p 5
Switch in
“Off” Position
Switch in
“On” Position
Valet/Override Switch
1x
2x