13
ASSEMBLE BLADE GUARD
Fix the blade with 2 knob screws, and the
star knob one the guide post can used to raise
and lower the blade guard as shown in (Fig. 18)
BLADE TENSION ADJUSTING
Fig.18
1. Turn power off and remove the upper cover.
2. Turn the tension bolt to adjust the tension or
increase the tension as shown in (Fig. 19) &
(Fig.20) (Fig.20-1).
1. Turn power off, open upper wheel cover and
remove the sliding table from the band saw unit.
2. Move the blade guides away from the blade,
so the blade can easily slide out and away
from the blade guide assembly.
Tension bolt
3. Remove the V-belt, and release the tension
from the blade tension bolt.
Fig.19
4. Remove the blades as shown in (Fig. 21)
Fig.20
