11
ASSEMBLE TABLE
1.Place and fix one guide sliding rail to the
underside of the sliding table as shown
in (Fig. 13)
Fig.13
2. Slide the blade of band saw through the
slot in the sliding table and place the
sliding table on the rollers. (Note that the
rails should be seated on and put rail hex
corner in the grooves.)
Align the table to
make the blade at the center of the slot
so it won’t hit the blade by adjusting the
position of the screw for the sliding rail.
3. Attach the fixed plate under the open edge of
the table with ( M6-1*12 ) hex bolts as shown
in (Fig. 14)
Fig.14
4. Attach the rails to the table end with knob screws
as shown in (Fig.15)
Fig.15
