12
5. Tighten the rails in place, so they can slide
in the roller grooves.
Attention: It is best to position the inside rail so the
Blade is centered in the slot, then squeeze the outer rail into
The roller groove and tighten the screw. Please make sure
The rails are secure in the rollers and the blade does not
Make contact with blade.
6. Make sure the rails are in the roller grooves
and that the table slides smoothly as shown in
(Fig. 15-1).
Fixed plate
Fig.15-1
ASSEMBLE FENCE
1. Attach the fence supporter with hex bolts (M6-1*20) to the table.as shown (Fig. 16-1)
2. Insert the fence rod into the large fence and small fence with knob screws.
3. Attach the large fence into the supporter on the left, and the small fence into the supporter in front with
knob screws as shown in (Fig.16)
Fig.16
Fig.16-1
