Carbatec RT-RPU2400, Manual

Page: 8 / 28

FOR TEC HNICAL SUPPOR T CALL 1800 658 111
RT-RPU2400
9. WEAR PROPER CLOTHING.
DO NOT wear loose clothing, gloves,
neckties, or jewelry. These items can
get caught in the machine during
operations and pull the operator into
the moving parts. The user must wear
a protective cover on their hair, if the
hair is long, to prevent it from contacting
any moving parts.
10. CHILDPROOF THE WORKSHOP AREA
by removing switch keys, unplugging
tools from the electrical receptacles,
and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM
THE ELECTRICAL RECEPTACLE
when making adjustments, changing
parts or performing any maintenance.
12. KEEP PROTECTIVE GUARDS IN
PLACE AND IN WORKING ORDER.
13. AVOID ACCIDENTAL STARTING. Make
sure that the power switch is in the
“OFF” position before plugging in the
power cord to the electrical receptacle.
14. REMOVE ALL MAINTENANCE TOOLS
from the immediate area prior to turning
“ON” the machine.
15. USE ONLY RECOMMENDED
ACCESSORIES. Use of incorrect or
improper accessories could cause
serious injury to the operator and cause
damage to the tool. If in doubt, check
the instruction manual that comes with
that particular accessory.
16. NEVER LEAVE A RUNNING TOOL
UNATTENDED. Turn the power switch
to the “OFF” position.
DO NOT leave the tool until it has come
to a complete stop.
17. DO NOT STAND ON A TOOL. Serious
injury could result if the tool tips over,
or you accidentally contact the tool.
18. DO NOT store anything above or near
the tool where anyone might try to stand
on the tool to reach it.
19. MAINTAIN YOUR BALANCE. DO NOT
extend yourself over the tool. Wear oil
resistant rubber soled shoes. Keep floor
clear of debris, grease, and wax.
20. MAINTAIN TOOLS WITH CARE. Always
keep tools clean and in good working
order. Keep all blades and tool bits
sharp, dress grinding wheels and change
other abrasive accessories when worn.
21. EACH AND EVERY TIME, CHECK FOR
DAMAGED PARTS PRIOR TO USING
THE TOOL. Carefully check all guards
to see that they operate properly, are not
damaged, and perform their intended
functions. Check for alignment, binding
or breaking of moving parts. A guard or
other part that is damaged should be
immediately repaired or replaced.
22. DO NOT OPERATE TOOL WHILE
TIRED, OR UNDER THE INFLUENCE
OF DRUGS, MEDICATION
OR ALCOHOL.
GENERAL SAFETY
8