manualshive.com logo in svg

Carbatec RT-RPU2400, Manual

Share
Download
Carbatec RT-RPU2400 Manual Download Page 21

CARBATEC.C OM.AU

RT-RPU2400

MAINTENANCE

CLEANING

!

To reduce the risk of injury, always 

unplug your tool before performing any 

maintenance. Never disassemble the 

tool or try to do any rewiring on the tool’s 

electrical system.

TOOL MAINTENANCE 

Keep your tool in good repair by adopting a 

regular maintenance program. Before use, 

examine the general condition of your tool. 

Inspect guards, switches, power cords and 

extension cord for damage. Check for loose 

screws, misalignment, binding of moving 

parts, improper mounting, broken parts and 

any other condition that may affect its safe 

operation. If abnormal noise or vibration 

occurs, turn the tool off immediately and have 

the problem corrected before further use. Do 

not use a damaged tool.

!

To reduce the risk of injury, electric shock 

and damage to the tool, never immerse 

your tool in liquid or allow a liquid to flow 

inside the tool

CLEANING YOUR TOOL

Clean dust and debris from vents. Keep tool 

handles clean, dry and free of oil or grease. 

Use only mild soap and a damp cloth to 

clean your tool. Never use cleaning agents 

and solvents such as: gasoline, turpentine, 

lacquer thinner, paint thinner, chlorinated 

cleaning solvents, ammonia, household 

detergents containing ammonia, flammable 

or combustible solvents around tools. These 

are harmful to your tool, plastics and insulated 

parts.

21

Summary of Contents for RT-RPU2400





























Reviews:

No comments

Brands by name

Popular brands

Load more brands