Manual for Tire Pressure Monitoring System, TPMS
21/21
4.
The receiver cannot receive signal from any of the four tires after its power is turned on the
numeric values representing tire locations displayed on the screen all become “E1”.
1. There is interference from other electronic device in the vehicle.
Solution
：
Remove other electronic device in the vehicle to determine if TPMS is interfered by
those removed devices.
2. The inner circuits of the display panel failed.
Solution
：
Ask your distributor to have your receiver replaced, reconfigure its ID using the Tire
Switching Mode (Mode IV), and send the defected receiver back to manufacturer for repair.
5.
The buzzer has no sound output.
1. The inner circuits of the receiver failed.
Solution
：
Ask your distributor to have your receiver replaced, reconfigure the IDs of the tires
using the Tire Switching Mode(Mode IV),and then send the defected receiver back to
manufacturer for repair
6.
The pressure (or temperature)values show the wrong tire locations
1. The IDs of the four tires are not configures correctly
Solution
：
Ask your installation supplier to reconfigure the IDs of the tires by using the Tire
Switching Mode (Mode IV or Mode V).
2. After rotating the tires, it cannot reconfigure the IDs from sensors.
Solution
：
Ask your installation supplier to reconfigure the IDs of the tires by using the Tire
Switching Mode (Mode IV or Mode V).
Summary of Contents for TPMS CRX-1001
Page 1: ...MANUAL TPMS CRX 1001...
