Version 25.09.2017
DT3-E65-TV
Pag
e
4
1.4.
Setting the dip switches of the tuner-box
The default dip switch settings of the tuner-box
need to be changed ONLY if a rear-view camera is
or shall be connected or if the AV of the dvbLOGiC
shall be deactivated. The dip switches are located
inside
the tuner-box. For changes it is necessary
to open the box. Default settings are:
Dip1 = ON, Dip2 = OFF, Dip3 = OFF
1.4.1.
Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected or a factory
rear-view camera is connected, in order for the dvbLOGiC to
automatically switch to its camera input, when reverse is engaged
set dip2 = ON (up).
Note:
Automatic switching works only from dvbLOGiC mode.
1.4.2.
Deactivating dvbLOGiC AV input
If no peripheral AV-source shall be connected to the dvbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the dvbLOGiC,
set dip1 = OFF (down).
Dip switches
of tuner-box
Dip switches
of tuner-box