Version 25.09.2017
DT3-E65-TV
Pag
e
8
2.2.
Installation of tuner-box DT3C-M736
The fibre optical interface installation is
made at the navigation computer, which
is located at the left side in the trunk
behind a cover and has to be removed.
The factory TV-tuner must be uninstalled.
Remove the factory optical leads of the factory
TV-tuner port (blue female connector) and connect
it to the black male MOST®-connector enclosed to
harness C2C-BM01. Pay attention to the
directional arrow on the optical lead connectors.
Connect the black male MOST®-connector to the
female MOST®-connector on the rear of the
tuner-box DT3C-M736 (OPTICAL).
Connect the blue male connector of harness
C2C-BM01 to the factory TV-tuner port
(blue female connector).
Picture exemplary
