Caratec CEB100B, Installation & Operating Instructions Manual

Page: 34 / 68

4.3 Using the Bluetooth App
Tapping the Lan button in the top right-hand
corner opens the the language selection menu opens
Selection list of batteries in the vicinity
Here you can see the name of the battery (if assigned)
and the MAC address of the Bluetooth module. By tap-
ping the MAC address of your battery (you will find the
MAC address of your battery on the small sticker of the
battery), the app connects to the battery.
If no MAC addresses are displayed, press the Scan
button. If your battery is still not displayed, check the
voltage of the battery, it may be disconnected.
SOC:
Current state of charge (SOC) in %
Time To Go: Shows the remaining operating time at the
current discharge current
Status: Shows the mode
Current:
Current flowing charging or discharging current n A
Voltage: Current voltage in volts
Capacity: Total capacity of the battery in Ah
CYCLES: Shows the number of charging cycles
TEMP: Current internal temperature of the battery
Caratec ELECTRONICS
34|35