disposed of city solid refusals but collected
separately, in order to optimize the level of recovery
and recycling of the materials and above all in order
to prevent damages to health and environment.
To comply with European Directive 2002/96/CE, all
electrical equipments must be marked with crossed
basket symbol.
The packing of the machine will be disposed of in
accordance with the methods laid down by current
legislation.
For further information concerning disposal of
electrical equipment, please refer to public
administration service.
GB
37
Problem
The machine is not working.
The lubricant is not reaching the
cutting tool.
The motor is emitting a bad smell.
The motor is not starting properly.
The laser marker is not working.
Cause
The power supply cable is
connected incorrectly or
damaged.
There is no power in the electrical
socket.
The amperometric excess current
circuit breaker has tripped.
The high temperature trip switch
is damaged.
The control switch is damaged.
The sprayer is blocked.
The water circulation pump is
damaged.
The lubricant pipe is flattened.
Water has got into the motor.
The motor is damaged.
The motor bearings are
damaged.
The motor is damaged.
The laser module is damaged.
The marker feeder is damaged.
Remedy
Push it all the way into the plug.
Check the power supply cable.
Have the electrical socket tested.
Push the reset button.
Contact your retailer for a
replacement.
Contact your retailer for a
replacement.
Remove the sprayer from inside
the disc guard and clean off any
residue.
Contact your retailer for a
replacement.
Remove anything obstructing the
lubricant pipe.
Contact your retailer for a
replacement.
Contact your retailer for a
replacement.
Contact your retailer for a
replacement.
Contact your retailer for a
replacement.
Contact your retailer for a
replacement.
Contact your retailer for a
replacement.
13. Finding malfunctions
THE T-5010/T-6010 SAW MUST BE REPAIRED BY QUALIFIED PERSONNEL.
This machine complies with the relevant safety standards. Repairs must only be carried out by
qualified personnel using original spare parts, or else the operator could be put at serious risk.
