"TRANSLATION OF THE ORIGINAL INSTRUCTIONS”
Power Supply:
230V 50Hz~
Power Rating:
2,2 Kw
Type of operation allowed:
INTERMITTENT - SERVICE S6 40%
40%
operating under load
60%
running freely
Rotation Speed:
2800 min
-1
Capacitor:
40 µF
Amperometric circuit breaker:
13A
Thermal circuit breaker:
160°C
IP level:
54
Working mass:
68 Kg
Tank capacity
(min/max)
:
19 / 25 lit.
CUTTING TOOL
DIAMOND TIPPED DISC
CONTINUOUS CROWN:
Ceramics, marble, grès, terracotta
LASER / SECTORS:
Concrete, natural stone, granite, abrasive materials
(With narrow eyelets, max. 5 mm).
TURBO:
Concrete, natural stone, granite, refractory material
THE TOOL
/ MATERIAL
TO BE CUT
COMBINATIONS ARE PURELY INDICATIVE.
ALWAYS APPLY
THE OPERATING
INSTRUCTIONS SUPPLIED BY THE TOOL
MANUFACTURER, BEFORE EACH
APPLICATION.
Max tool diameter:
Ø350 mm
Tool hole:
25,4 mm
Max cutting depth:
90° cut:
110 mm
45° cut:
80 mm
Max cut length:
800 mm
Water circulation pump:
S2 230V 50Hz
Under working conditions, the machine has a
noise emission above 85 dB (A).
The level of noise emitted by the machine was
measured in accordance with UN EN12418 and UN
EN3744 standards, in conformance with directive
98/37/EC.
LW - SOUND POWER LEVEL = 79.8/0.0 dB(A)
/mW(A)
LOP - SOUND PRESSURE LEVEL AT THE
OPERATING POSITION=68.5 dB(A)
LOP Max - PEAK SOUND PRESSURE LEVEL IN
THE OPERATING POSITIO N=80.7 dB(C
Measurements were taken with no load and at the
maximum speed using a turbo cutting tool with a
diameter of 350 mm. Art. 867.
Under working conditions, the machine has a noise
emission above 85 dB (A).
The hand-arm vibration level transmitted was
measured in accordance with the UN ISO 5349
standard during the cutting of poroton brick.
(L 280 x L 140 x H 100 mm) with a turbo cutting tool
with a diameter of 350mm. Art. 967
- Weighted acceleration value at = 1.15 m/s2
(measurement uncertainty of 0.28m/s2).
GB
24
Technical Data
