Carat C 2067, Operating Instructions Manual

Page: 27 / 72

"TRANSLATION OF THE ORIGINAL INSTRUCTIONS"
Voltage: 230V 50Hz~
Power absorbed: 1000W
Admissible working conditions:
INTERMITTENT - S3 50%-SERVICE
30 sec. under load running
30 sec. rest
Rotation speed: 2800 min -1
Capacitor: 18 µF
IP Degree: 54
Thermal circuit breaker: 170°C
Tool:
CONTINUOUS CROWN DIAMOND BLADE
WET CUTTING
Diameter: Ø200 mm
Centre hole: 25,4 mm
Max. cutting depth: 40 mm
Water recirculation pump: S0 230V 50/60Hz
Recommended use:
CERAMIC, SINGLE-FIRED CERAMIC, COTTO
AND MARBLE (max. thickness 20 mm.)
Weight:
37 Kg 41 Kg
Tank capacity (min/Max):
12 / 15,5 Lt 15 / 19,5 Lt
Max. cut length:
670 mm 900 mm
Max format tile for diagonal cut:
450 x 450 mm 620 x 620 mm
Machine dimensions:
660 x 1070 x h. 1200 660 x 1300 x h. 1200
The noise level emitted by the machine has been
measured in conformity with the EN3745.
LW standard – SOUND POWER LEVEL = 71.4/0.0
dB(A) /mW(A)
LOP
– SOUND POWER LEVEL AT THE
OPERATOR’S POSITION=62.7 dB(A).
The measurements were taken without any load
and at the maximum speed using a cutting tool of
diameter 200mm. continuous crown type.
In working conditions the machine has a noise
emission of more than 85 dB(A).
GB
27
Technical data
C 2067 C 2090
C 2067 C 2090