Carat BS-1255, Manual

Page: 111 / 114

111
NO
PARTS LIST (BS-1255)
NO. Parts Name Q'TY
1 POWER SUPPLY CABLE 1
2 CORD ARMOR 1
3 PANHEAD TAPPING SCREW (M4x14) 5
4 CABLE CLIP 1
5 TRIGGER SWITCH (LOCK-OFF/LOCK-ON) 1
6 N/A -
7 HANDLE HALF-RIGHT 1
8 HANDLE HALF-RIGHT 1
9 PANHEAD TAPPING SCREW (M4x35) 2
10 PANHEAD TAPPING SCREW- (M4x20) 2
11 PANHEAD TAPPING SCREW (M4x25) 6
12 HANDLE HALF-LEFT (BLACK) 1
13 HANDLE HALF-LEFT 1
14 RUBBER PLUG 4
15 SOCKET CAP SCREW (M4x6xP0.7) 4
16 CROSS BAR LOWER 1
17 CROSS BAR UPPER 1
18 CABLE BUSHING 3
19 ANTI-VIBRATION MOUNT 2
20 PANHEAD TAPPING SCREW (M5x35) 4
21 MOTOR TAIL CASTING 1
22 MOTOR TAIL CASTING 1
23 PANHEAD TAPPING SCREW (M4x30) 2
24 THUMB WHEEL 1
25 ELECTRONICS UNIT (110V/220V) 1
26 THREE WIRE PUSH IN CONNECTOR 2
27 PANHEAD TAPPING SCREW (M4x10) 4
28 BRUSH SPRING (0.35x4x4T) 2
29A CARBON BRUSH (7x17x17) 2
29B CARBON BRUSH (7x17x20) 2
30 CARBON BRUSH HOLDER (7x17) 2
31 PANHEAD MACHINE SCREW (M4x10xP0.7) 1
32 FLAT WASHER (Ø4xØ10x1) 1
33 RUBBER WASHER (Ø4xØ11x1) 1
34 PICKUP MAGNET (Ø8xØ15x5) 1
35 SPACER (Ø8xØ12x10.5) 1
36 MOTOR HOUSING 1
37 STATOR (110V/220V-94x54x45) 1
38 PANHEAD TAPPING SCREW (M5x60) 2
39 FAN BAFFLE 1
40 BALL BEARING (6200) 1
41 ARMATURE(110V/220V-94x54x45) 1
NO. Parts Name Q'TY
42 BALL BEARING (6202) 1
43 ARMATURE GEAR (M1.5x12T) 1
44 GEAR PLATE 1
45 PANHEAD MACHINE SCREW (M4x25xP0.7) 2
46 HANDLE BRACKET 1
47 BALL BEARING (608) 1
48 OUTPUT GEAR (M1.5x28T) 1
49 GEAR HOUSING 1
50 SOCKET CAP SCREW (M4x12xP0.7) 8
51 PANHEAD TAPPING SCREW (M5x45) 4
52 EXTERNAL CIRCLIP (S-17) 1
53 BALL BEARING (6303) 1
54 PARALLEL KEY (5x5x12) 1
55 SPINDLE (M14xP2.0-88MM) 1
55 SPINDLE (5/8"x11-88MM) 1
56~59 N/A -
60 SOCKET CAP SCREW (M4x10xP0.7) 4
61~64 N/A -
65 INNER FLANGE (Ø22.2 / Ø25.4) 1
66 OUTER FLANGE (M14) 1
67 LOCK NUT WRENCH (30MM) 1
68 FACE SPANNER WRENCH (93MM) 1
69~70 N/A -
71 ZIP TIE (2.5x100MM) 4
72 WIRE SLEEVE (Ø6x45CM) 1
73 HEX KEY (M6) 1
74~75 N/A -
76 FELT OILER (Ø24xØ31.8x2.5) 1
77 BEARING PLATE 1
78~79 N/A -
80 HALF-MOON DOOR -
81 BRUSH-SMALL 1
82 N/A -
83 PANHEAD TAPPING SCREW (M4x10) 6
84 DUST SKIRT 1
85 BRUSH-LARGE 1
86 SHOULDER BOLT (M4xP0.7x26L) 4
87 FLAT HEAD TAPPING SCREW-B (M4x10) 3
88 COVER PANEL 1
89 SPRING (Ø0.55xØ4.9xØ6x15Lx6T) 4
A1 DIAMOND GRINDING HEAD (60/80) 1