2.1 DIP switch
8
#PIN
Function
DIP S/W selection
1
RGB INPUT MUTE
ON : Skipping RGB Mode
OFF : RGB Display
2
A/V 1 MUTE
ON : Skipping A/V 1
OFF : A/V1 Display
3
A/V 2 MUTE
ON : Skipping A/V 2
OFF : A/V2 Display
4
A/V 3 MUTE
ON : Skipping A/V 3
OFF : A/V3 Display
5
N.C
6
N.C
7
When to choose rear mode (ON : CVBS4, OFF : MAIN)
8
To select original
NAVI
ON : Changing mode ;
Main-Main-NAVI-AV1~3
(This is for original Navi)
OFF : Changing mode ;
Main-NAVI-AV1~3
※DIP S/W Use Example
-. Use Input Mode : A/V2, A/V3
-. Use original Navigation
▷ DIP S/W : 1,2 -
ON (INPUT MODE SKIP)
▷ DIP S/W : 3 -
OFF (enable A/V3)
▷ DIP S/W : 4 -
OFF (enable A/V3)
▷ DIP S/W : 5,6,7 -
OFF
▷ DIP S/W : 8 -
ON
※
Please make sure to disconnect the power cable of the interface and reconnect
the power cable again to apply the dip switch setting whenever changing DIP switch.
Otherwise, DIP switch setting will not be applied.
CarNavi-Tech
