CTR9 Car-O-Liner
Group
AB
49023, EN - rev. 4,
2020-01
67
5 Welding menu
5.1 General
The following welding programs are available on the CTR9 welder:
Two sided spot welding
Multi-function gun applications:
Dent puller, Welding of clip rivets, Welding of screws and
Carbon rod for shrinking, Welding of nuts, Stich welding.
A-Tong mode
5.2 Control
panel
and
display
Figure 4.4 The CTR9 control panel and display
Coating selection
for pre pulse
Toggle between Zink coat,
Ed coat, Ed coat+,
Dry glue
Coating display
Displays the
selected coating
for pre pulse
Welding
time
Type of
material
Welding
current
Thickness
of material
Main display
Displaying selected
number of metal sheets,
material, and thickness
of material, tools for
Multi function gun etc
WeldLogger
Activate the weld
logger
Water
For turning off/on cooling
water pump when chang-
ing electrodes
Welding
mode
(Auto2)
Number of
metal sheets
Measured
electrode force
(daN)
, bottom
and set value, top
Measured air
pressure
(bar)
,
bottom
and set value, top
Welding processes
Toggle between
Full auto
(default setting)
Auto1
Auto2
Manual
Set buttons
Use
up/down
but-
tons to set number
of metal sheets,
type or thickness
of material.
Use left/right
but-
tons to change from
e.g type to thickness
of material or Enter
function.
Menu 1 / Menu 2
Displays menu 1
with previous log
files from Weld
logger or menu 2
with user settings
Active tool display
Displays active tool (C-Tong,
Multi function gun or A-Tong)
or Weld logger.
Change tool
Toggle between different tools
(C-Tong, Multi function gun, A-Tong)
and menu 2 for user settings.
