Version 08.04.2021
HW CAM(V31)/(V22)
CI-RL2-RLINK
P
a
g
e
18
3.
Interface operation
3.1.
By VOL- button
Press VOL- on steering-wheel 2x quickly
to switch the video source. Each repetition will
switch to the next enabled input. If all inputs are enabled the order is:
Factory video
video IN1
video IN2
factory video
Disabled inputs will be skipped. While switching from
Video IN1
to
Video IN2
the audio-
source will be switched too, assuming the sources have also been connected to the audio
cable.
.
Switchover by vehicle buttons isn’t possible in all vehicles. In some vehicles the external
keypad must be used.
Note:
The white wire of the 6pin cable can be used with a +5-12V pulse to switch the video-
sources alternatively.
3.2.
By external keypad or white wire of the 6pin cable
Alternatively or additionally to the factory-infotainment-buttons the interface’s keypad or
the white wire of the 6pin cable can be used to switch the enabled inputs.
Note:
Even if the switching through several video sources by the keypad mightn’t be
required, the keypad’s invisible connection and availability is strongly recommended.
4.
Specifications
BATT/ACC range
7V - 25V
Stand-by power drain
25mA
Power
200mA @12V
Video input
0.7V - 1V
Video input formats
PAL / NTSC
RGB-video amplitude
0.7V with 75 Ohm impedance
Temperature range
-40°C to +85°C
Dimensions video-box
113 x 22 x 96mm (W x H x D)
Dimensions CAN-box
70 x 22 x 42 mm (W x H x D)
