CaptiveWorks CW-3000HD, User Manual, Page: 70 / 107

The "Schedule" Menu
●
The "Schedule" menu presents a list style "Electronic Program Guide" (EPG).
●
Select "Schedule" from the "VDR" menu to get a list of all upcoming broadcasts on the
current channel.
●
Up and Down can be used to scroll through this list, and pressing Enter displays detailed
information about the selected program. Pressing Enter again (or pressing Exit) returns
back into the "Schedule" menu.
●
From the "Schedule" menu, the Green button opens the “What's on now?" menu, which
displays all programs that are currently running on all channels that have EPG.
●
The Yellow button opens the "What's on next?" menu, which lists all programs that will
start next on all channels.
●
Inside the "What's on now/next?" menus the Green button toggles between the "Now"
and "Next" display, and the "Yellow" button displays the "Schedule" menu of the
current channel in the list.
●
The Red button allows programming a timer to record the selected program instantly.
After pressing this button, the current event will be marked with 'T', and the function of
the Red button will change from "Record" to "Timer".
●
Pressing Red on an event marked with 'T' will open the "Edit timer" menu for this timer,
where one can make any desired modifications. Note that the Start and Stop time are
offset by 2 minutes in order to make sure the entire program is recorded in case it doesn't
exactly adhere to its published start/stop times. Of course, no guarantee can be given
that the default 2 minutes will be sufficient, extra margin can be added if this recording
is extremely important.
●
VPS recordings will use the exact Start (or VPS) and Stop times as given in the event. If
a timer is newly created from within the "Schedule" menu, and its event is already
running or has its start time within the next two minutes, it goes directly into the "Edit
timer" menu in order to allow the user to make further changes to timer parameters
before the actual recording starts.
●
The Blue button can be pressed to switch to the channel with the selected program.
●
The following markers in these menus give additional information about the status of the
events:
t there is a timer defined for this event which covers only part of the event
T there is a timer defined for this event which covers the entire event
V this event has a VPS time that's different than its start time
* this event is currently running (the validity of this marker depends on whether)
(there is currently a DVB card receiving the transponder this channel is on)
●
Pressing 0 in the "Schedule" menu rotates through displaying "This event on this
channel", "This event on all channels" and "All events on all channels". This can be used
to find reruns of a given show, or the episodes of a series. Note that if there are many
channels in the channels list, displaying the "All events on all channels" page may take a
while.
PAGE 70
BACK TO
TOC