CaptiveWorks CW-3000HD, User Manual, Page: 29 / 107

Display Setup
●
Select the Type of physical video connection you wish to utilize.Choose DVI to use the
HDMI connector on the CW-3000HD Rev 2.
●
Select the Display resolution that corresponds with your Television hardware capabilities.
(CAUTION: Ensure you are selecting settings that are supported by your hardware)
●
Select the aspect ratio you wish to use (16:9 is wide screen format)(4:3 is regular TV)
●
Fill mode is a function that allows you to stretch 4:3 video to fill a 16:9 screen.
●
Press the blue button to save the changes
●
After saving your settings you will be prompted to restart the CW-3000HD
●
The preferred method is as follows:
1. Back out to the Main Admin screen
1. Press the power button on the remote.
2. Select shutdown.
3. Physically hook up the appropriate cable matching the mode you've selected.
4. Power on the CW-3000HD
NOTES:
Only use 1 video connection between the CW-3000HD and the TV. The CW-3000HD is only
capable of displaying on 1 device at a time.
If after powering up the CW-3000HD and waiting until the boot-up screen reaches 100% there
is only a blank screen wait three seconds then aim the remote control directly at the front of the
CW-3000HD and type in 1346. This will cause it to reboot with default video settings. Return
to Display Setup and select a compatible setting.
PAGE 29
BACK TO
TOC