Can the grinder run without beans in the bean container?
- Yes, it is ok if the grinder runs without any beans.
Can I have different grind amount settings for the current and the
Auto-On mode?
- Yes. See chapter 7.1, e.
How long does the machine keep the grinding and brewing settings?
- As long as the machine is plugged in. If the machine loses power you have
to reset the time and personal settings (see chapter 7).
I want a full pot of coffee at 8:00 AM. What time should I program the
machine to start?
- Set the Auto-On timer 15 minutes earlier (in this case at 7:45 AM).
The grinder makes a loud noise, no coffee is processed.
- Ground coffee is blocking the grinder or grinder chute. Follow cleaning
instructions in chapters 10.5 to 10.7.
- Once cleaning instructions have been followed, attempt to run a Grind &
Clean Cycle (Chapter 10.5).
- A stone blocks the grinder. Remove bean container and upper burr to check
for any stones or foreign objects. If you cannot locate and remove the stone
on your own, please call 1-800-767-3554.
How can I increase the strength of the coffee?
- Select 12 in the CUPS setting but only fill the water tank to the 8 cup marking.
This will give you more ground coffee in the filter and increase the strength of
the brew See chapter 7.2.
Grinder suddenly stopped during grinding cycle or beans are not feeding.
- Check that bean container lid is pressed down and fully engaged.
- Press the "Ground Coffee" and "Auto" buttons at the same time to clear the
grinder of any left over coffee beans stuck in grinder.13.
There is a long pause between the first grind and the second automatic
cleaning cycle and brewing has not started.
- A bean may be stuck inside the bean container doors preventing them from
closing and starting the second grind cycle. Tap the bean container lightly to
move bean into grinder and the second grind should start and the machine
will then start to brew.
Loud buzzing noise during grinder operation and grinder gets blocked or
jammed.
- Push the brew button to stop grinding and unplug the machine.
- Follow cleaning instructions in chapters 10.5 to 10.7 to remove the ground
coffee from the coffee chute and conical burrs.
- Once cleaning instructions have been followed, attempt to run a Grind &
Clean Cycle (Chapter 10.5).
18
