background image

WELCOME TO THE CAPRESSO CoffeeTEC

Thank you for choosing this unique CAPRESSO product. Your new CoffeeTEC has
two distinctly different functions which work completely independently of each
other: 

Brewing Coffee

and 

Frothing Milk

. Please study these operating instruc-

tions carefully before operating your new CoffeeTEC and keep them in a safe place
for easy reference in the future. Understanding and complying with these directions
is essential to ensure that the machine is utilized without risk and to ensure safety
during operation and maintenance. Should you require further information or if par-
ticular problems occur that are not covered in this manual, please contact your local
dealer or 

call our toll free HELP LINE: 1-800-767-3554 9AM to 9PM Eastern

Standard Time, Monday through Friday 

and 

9AM to 5PM on Saturday.

If you call at any other time, please leave a message with your telephone number
and when we can call you back. You can also send us a 

fax

at 1-

201-767-9684

,

or 

e-mail

us at 

[email protected]

.

EQUIPMENT

The CoffeeTEC comes complete with:
•  Stainless Steel Carafe with Lid
•  GoldTone Filter (inserted in removable Filter Holder)
• Removable Water Container
•  Measuring Scoop and Mail Order Form for Parts and Accessories
frothXpress System with:
•  Milk Container with Lid and Siphoning Straw attached
•  Steam Nozzle (figure 3; U) attached to machine
•  4-piece Frothing Assembly (figure 3; V, W, X, Y) packed in Milk Container
•  Special Decalcifying Hose (see figure 14)
•  Flexible Siphoning Hose (see figure 11)
•  Drip Grid and Drip Tray (figure 1; F, G)

FEATURES AND BENEFITS OF THE CoffeeTEC

•  10-cup coffee maker with stainless steel vacuum carafe keeps coffee hot for up 

to 4 hours without reheating. (A full pot of coffee is more than 180˚ F after brew-
ing, and more than 160˚ F after 4 hours.)

•  Carafe lid is closed during the brewing process, preventing aroma and heat loss. 

Since lid is closed, carafe can remain on the platform after brewing has finished.

•  Safety push button swing-out filter prevents accidental opening.
•  Drip-stop allows you to pour a cup of coffee while brewing.
•  Removable filter holder for easy cleaning.
•  Fast brewing process allows you to brew 10 cups of coffee in under 8 minutes. 

(Remember the shorter the brewing time, the less bitter your coffee tastes.)

•  Illuminated digital programmable clock/timer displays the time and allows you to 

program the coffee maker to make coffee anytime you want.

•  Five signal lights indicate the status of your CoffeeTEC.
•  Removable water container has cup markings and two water compartments for 

coffee and steam. Automatically fill water for brewing coffee 

and

frothing milk, or 

just fill water for frothing milk.

•  Patented frothXpress System instantly delivers hot milk or milk froth for up to

8 regular cappuccinos at a time, directly into your coffee mug or cappuccino cup.
No frothing pitcher needed, no waste of milk, simply the fastest way to produce 
frothed milk.  

•  frothXpress System can also be used to produce hot chocolate.
•  2-hour safety auto shut-off.

7

Summary of Contents for CAPRESSO CoffeeTEC













Reviews: