background image

90

safety and troubleshooting

This may be because the dispenser needs cleaning. This
simple operation is described in 

Maintaining and cleaning

the appliance.
1- Cleaning the detergent dispenser.

Washing machines today are provided with safety systems
for users. One of them is that the washing machine cannot
be opened until it is certain that the drum is quite still. This
is why the hatch cannot be opened for 2 minutes.

This time is for guidance purposes only and may be affected
by the conditions under which the selected programme is
being run, e.g. initial water temperature, size of load or
unbalance caused by the garments during spin drying.

The washing machine can detect other indications. When
this happens a number of other indicators appear on the
display: 

F05, F06..., F10

. If this happens, call the Official

Technical Service.

Why is there still some water

in the dispenser?

Why can’t I open the hatch

immediately after the wash

has finished?

Why doesn’t the remaining

time shown on the clock

coincide with the real time

left until the selected cycle

finishes?

Other indications

Summary of Contents for WDi2201


























Reviews: