Caple WDi2201 Installation And User Manual Download Page 21

Page: 21 / 25

washing machine

safety and troubleshooting

Never open up the

appliance. There is no fuse

or similar component inside

that can be replaced by the

user.

Important

If you detect any problems with
your washing machine, you will
probably be able to rectify them
yourself by consulting the following
instructions.

If this is not the case, unplug the
appliance and contact the

TECHNICAL ASSISTANCE

SERVICE.

This may be due to the following:

Check the door is properly shut.

The washing machine is not plugged into the mains or

there is no voltage in the mains supply.

The Start/Stop button has not been pressed.

If the washing machine door is not properly shut,

F04

will appear on the display.

This may be due to the following:

The blocking and transport screws have not been
removed.

The washing machine has not been correctly levelled.

Indicator

FO1

FO2

CO3

FO4

FO5

F10

Problems

No water coming in

Does not drain or spin-dry

Does not spin-dry

Does not start

Call the Technical Assistance Service

PROBLEMS

Why won’t the washing

machine start?

Why is the washing machine

vibrating or making too

much noise?

Summary of Contents for WDi2201


























Search results

Summary of Contents for WDi2201

Reviews:

Related manuals for WDi2201

Brands by name

Popular brands

Caple WDi2201, Installation And User Manual

Search results

Summary of Contents for WDi2201

Reviews:

Related manuals for WDi2201

Brands by name

Popular brands