25
Please keep this instruction manual for future reference
Instruction manual TDI4001
F - D RY I N G S E L E C T I O N B U T TO N
This allows you to select the required dryness level, it is possible to choose for up to five minutes
after the start of a drying cycle:
Ready to Iron:
Leaves the garments slightly wet to facilitate ironing.
Hanger Dry:
To make a garment ready to be hung on a coat hanger.
Wardrobe Dry:
For laundry that can be directly stored.
Extra Dry:
To get completely dry garments; ideal for full load.
This appliance is equipped with a Drying Manager Function. On automatic cycles, each level of
intermediate drying, prior to reaching the one selected is indicated by a flashing neon light that
indicates the degree of dryness that the garments have reached. In case of incompatibility, all
LEDS flash quickly 3 times.
G - A N T I C R E A S E B U T TO N
During the cycle the option sets alternate movements of the drum to reduce the folds and
automatically sets the drying level to “Ready to Iron”. This option activates an anti-crease
movement of the drum pre-cycle in case of activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6 hours after the end of the drying cycle. To stop the
movements, set the programme selector to OFF. This is useful when it’s not possible to immediately
remove the laundry.
H - D I S P L AY
The display shows the remaining time for drying, the time until a drying cycle will start (if delayed
start has been activated) and other notifications setting.
H
-
D I S P L A Y
The display shows the remaining time for drying, the time until a drying cycle will start (if delayed
start has been activated) and other notifications setting.
1) Drying Selection Indicator Lights:
These lights display the degrees of dryness that can be
selected by the relevant button.
2)
Water Tank
: Lights up when it is necessary to empty the water tank.
3)
Filter Cleaning
: Lights when the cleaning of the filters is necessary (the door and
the lower filter).
D - T I M E S E L E C T I O N B U T T O N
It’s possible to transform a cycle from automatic to programmed, up to 3 minutes after the
start of the cycle. The progressive pressure increases the time in 10-minute intervals. After this
selection, to reset the automatic drying functioning it is necessary to switch the dryer off. In case
of incompatibility, all LEDs flash quickly 3 times.
E
-
M E M O R Y
B U T T O N
This option allows you to store the options set on a cycle.
MEMORY: Select the programme and the desired options, then press the MEMORY button for 3
seconds (before starting the cycle). The control light “memory” will blink for 2 seconds and the
options connected to the cycle selected will be set.
RECALL: After the selection of the cycle, push the MEMORY button for recall of the stored options
(not the cycle).
N O T E :
The de
l
ay start function cannot be memorised.
F
- D R Y
I N G S E L E C
T I O N B U T T O
N
This allows you to select the required dryness level, it is possible to choose for up to five minutes
after the start of a drying cycle:
Ready to Iron
: Leaves the garments slightly wet to facilitate ironing.
Hanger Dry
: To make a garment ready to be hung on a coat hanger.
Wardrobe Dry
: For laundry that can be directly stored.
Extra Dry
: To get completely dry garments; ideal for full load.
This appliance is equipped with a Drying Manager Function. On automatic cycles, each level of
intermediate drying, prior to reaching the one selected is indicated by a flashing neon light that
indicates the degree of dryness that the garments have reached. In case of incompatibility, all LEDs
flash quickly 3 times.
G
-
A N T I C R E A S E
B U T T O N
During the cycle the option sets alternate movements of the drum to reduce the folds and
automatically sets the drying level to "Ready to Iron". This option activates an anti-crease
movement of the drum pre-cycle in case of activation of the delay and at the end of drying cycle. It
is activated every 10 minutes, up to 6 hours after the end of the drying cycle. To stop the
movements, set the programme selector to OFF. This is useful when it’s not possible to immediately
remove the laundry.
