15
Please keep this instruction manual for future reference
Instruction manual TDI4001
M O U N T I N G T H E F U R N I T U R E D O O R TO T H E A P P L I A N C E
When the position of the plinth is set back less than 54mm from the front of the furniture, install
according to the following:
› Position the template onto the reverse of the furniture door.
It is possible to mount the hinges and closure magnet on
the right or left-hand side depending on your requirements.
Mark the screw hole positions then drill them out.
NOTE:
We suggest mounting the furniture door so that it opens towards the left, same direction as the
porthole door.
› Fix the hinges in place (on the door) with the 4
screws provided (1).
› Fix the magnet (2) in place using screw (3).
› If necessary, use the gasket (4) to adjust and achieve the
appropriate assembly (down side).
max 20mm
= 54mm
> 54mm
Instruction manual TDI4000
Please keep this instruction manual for future reference
14
When the position of the plinth is set back less than 54mm from the front of the furniture, install
according to the following:
»
Position the template onto the reverse of the furniture
door. It is possible to mount the hinges and closure
magnet on the right or left-hand side depending on
your requirements.
Mark the screw hole positions then drill them out.
NOTE:
We suggest mounting the furniture door so that it opens towards the left, same direction as the
porthole door.
max 20mm
= 50mm
> 50mm
9
8
4
6
7
1
2 3
9
8
1
2 3
»
Fix the hinges in place (on the door)
with the 4 screws provided (1).
»
Fix the magnet (2) in place
using screw (3).
»
»
»
If necessary, use the gasket (4) to adjust and
achieve the appropriate assembly (down side).
Mount the plate (5) on the right or left-
hand side, depending on your installation
requirements.
Place the plastic support (6) under the plate
and fix it in position with screw (7).
.
56
4 2 33
4
5
6
5
6
7
4
5
6
5
6
7
Instruction manual TDI4000
Please keep this instruction manual for future reference
14
When the position of the plinth is set back less than 54mm from the front of the furniture, install
according to the following:
»
Position the template onto the reverse of the furniture
door. It is possible to mount the hinges and closure
magnet on the right or left-hand side depending on
your requirements.
Mark the screw hole positions then drill them out.
NOTE:
We suggest mounting the furniture door so that it opens towards the left, same direction as the
porthole door.
max 20mm
= 50mm
> 50mm
9
8
4
6
7
1
2 3
9
8
1
2 3
»
Fix the hinges in place (on the door)
with the 4 screws provided (1).
»
Fix the magnet (2) in place
using screw (3).
»
»
»
If necessary, use the gasket (4) to adjust and
achieve the appropriate assembly (down side).
Mount the plate (5) on the right or left-
hand side, depending on your installation
requirements.
Place the plastic support (6) under the plate
and fix it in position with screw (7).
.
56
4 2 33
4
5
6
5
6
7
4
5
6
5
6
7
› Mount the plate (5) on the right or left-hand side,
depending on your installation requirements.
› Place the plastic support (6) under the plate and fix
it in position with screw (7).
