24
Please keep this instruction manual for future reference
Instruction manual TDI4001
C A N C E L L I N G T H E S E T P R O G R A M M E
> To cancel the programme, turn the programme selector to the off position.
NOTE:
If there is a break in the power supply whilst the machine is operating, when the power is
restored, by pressing the START/PAUSE button, the machine will restart from the beginning of the
phase it was in when the power was lost.
C - D E L AY B U T TO N
It allows to delay the start of the programme from 1 to 24 hours in 1-hour intervals. The delay
selected is shown on the display. After pressing the START/PAUSE button the time shown
decreases hour by hour. If you open the porthole door with delayed start set, after re-closing the
porthole, press Start again to resume the counting.
D - T I M E S E L E C T I O N B U T TO N
It’s possible to transform a cycle from automatic to programmed, up to 3 minutes after the
start of the cycle. The progressive pressure increases the time in 10-minute intervals. After this
selection, to reset the automatic drying functioning it is necessary to switch the dryer off. In case of
incompatibility, all LEDs flash quickly 3 times.
E - M E M O RY B U T TO N
This option allows you to store the options set on a cycle.
MEMORY: Select the programme and the desired options, then press the MEMORY button for 3
seconds (before starting the cycle). The control light “memory” will blink for 2 seconds and the
options connected to the cycle selected will be set.
RECALL: After the selection of the cycle, push the MEMORY button for recall of the stored options
(not the cycle).
NOTE:
The delay start function cannot be memorised.