17
Please keep this instruction manual for future reference
Instruction manual TDI4001
› Fix the kick plate to the dryer.
› When using the full door, the door must have
min Ø127mm hole across the slots of the
kick plate.
7
RI5505 Fridge Freezer Instruction Manual.indd 7
RI5505 Fridge Freezer Instruction Manual.indd 7
05/02/2020 14:30
05/02/2020 14:30
Symbol ISO 7010 W021
Warning; Risk of fire / flammable materials
- The appliance is heavy and could cause injury, it must
be transported by two people.
DISPOSAL OF OLD APPLIANCE:
- Old fridges and freezers contain isolation material and
refrigerant with CFC. Therefore, take care not to harm
environment when you are discarding your old fridges.
- If your old fridge or freezer has a lock, break or remove
the lock before discarding it, because children may get
trapped inside it and may cause an accident.
- Be careful to avoid damaging the pipework before
disposal, e.g. by puncturing coolant channels, bending
pipework, scratching the surface coating.
WARNING
Serious injury or death risk
RISK OF ELECTRIC SHOCK
Dangerous voltage risk
FIRE
Warning; Risk of fire / flammable materials
CAUTION
Injury or property damage risk
IMPORTANT
Operating the system correctly
WARNING:
Without the airflow ventilation hole in the
furniture door/plinth we can not guarantee the
correct functionality of the appliance.
P L I N T H G R I L L E
When installing the appliance with a 150mm high
(or less) plinth, it is possible to purchase a
stainless-steel grille (GRILL/SENSE300) for the plinth
cut out. To purchase, visit www.caple.co.uk.
J
Min. Ø127mm
105mm
93mm
93mm
Min.
Ø127mm
504mm
J
Min. Ø127mm
105mm
93mm
93mm
Min.
Ø127mm
504mm
A LT E R N AT I V E I N S TA L L AT I O N - M O U N T I N G T H E F U R N I T U R E D O O R TO
T H E C A R C A S S
When the position of the plinth is set back more than 55 mm from the front of the furniture,
install according to the following:
NOTE:
Components not supplied:
› Hinges
› Supports
› Door stop