5
Electric Supply Requirements
WARNING!
This appliance must be earthed.
Your hob must be installed by a qualified
electrician in line with all electrical and
installation requirements published by
the institute of electrical engineers.
To connect the feeder cable to the hob,
you must unscrew the two screws on the
shield at the base of the hob - See fig.
5.
A double pole switch must be provided
no further than 2 metres from the
appliance to the electrical supply.
All supply current and earth conductors
must be able to withstand an ambient
temperature of 75°C.
The appliance must be connected using
cable (not supplied) in accordance with
the following code:
GREEN or GREEN
AND YELLOW
= EARTH
BLACK or BLUE
= NEUTRAL
RED or BROWN
= LIVE
As the colours of the wires in the cable
of this appliance (not supplied) may not
correspond with the COLOURED
markings identifying the terminals in the
socket proceed as follows:
●
The wire which is coloured GREEN
and YELLOW must be connected to
the terminal which is marked with letter
(E) or by the Earth symbol
or
coloured GREEN or GREEN and YEL-
LOW.
●
The wire which is coloured BLUE must
be connected to the terminal which is
marked with the letter (N) or coloured
BLACK.
●
The wire which is coloured BROWN
must be connected to the terminal
which is marked with the letter (L) or
coloured RED.
NOTE: This appliance is intended to be
permanently connected to fixed wiring.
L
N
Fig. 5