background image

Ed. 3 - Cod. 110928

ß5

CAPLE “Built-in” Service

Should you require service at any time,
please contact the Caple Helpline on
01245 322770.

Caple have a nationwide service
network of engineers who will respond
quickly to your call.

YOUR GUARANTEE

CAPLE guarantees all parts of this product for one year from the date of pur-

chase. During that time, should it become necessary CAPLE engineers will

replace or repair all defective parts free of charge, except for parts subject to

fair wear and tear, such as lightbulbs.

Parts and the engineers labour costs are chargeable after the first 12 months.

To qualify for benefits under the guarantee, you must be able to provide proof
of date of purchase and the appliance must have been supplied, installed and

used for domestic purposes only in accordance with CAPLE instructions.

Consequential losses and accidental damage to the product are not covered

by the guarantee.

This guarantee does not affect your statutory or common law rights.

CAPLE cannot be responsible for the results of using this appliance for any

other purposes other than those described in these instructions.

Always replace spare parts with genui-
ne  Caple spares. These are available
from authorised Caple Service
Centres 
or by mail order from our
National Service Stores, simply
telephone 01245 322770.
When ordering parts always quote the
model number and serial number of
your appliance.

Summary of Contents for C901H













Reviews: