20
•
The safety gap between the hob and the cooker hood placed above must respect the
indications of the hood manufacturer. In case of absence of instructions, use a minimum
distance of 760mm.
•
After installation, make sure the connection cord is not being constrained e.g. by the
drawer.
•
WARNING:
Only use hob guards designed by the manufacturer, indicated as suitable in
the manufacturer’s instructions for the appliance, or those that have been incorporated
into the appliance. The use of inappropriate guards can cause accidents.
Ventilation requirements
To ensure adequate ventilation of your induction
hob, please ensure the installation requirements
shown in this diagram are followed.
A 5mm gap at the front of the unit must be left, and
a minimum 10mm gap must be cut out at the back
of the cabinet to allow air to circulate.
A minimum distance of 20mm must be left between
the underside of the hob and the appliance directly
below. If a drawer is intalled below the hob, a
minimum distance of 40mm must be left between
the underside of the hob, and the contents of the
drawer.
Over filling the drawer may effect the airflow. If the
drawer is overfilled or the ventilation requirements
not followed, this will void the guarantee.
