5
cabinet preparation
RECOMMENDED INSTALLATION INSTRUCTIONS
(
If installing a full backguard with the cooktop)
A)
Vent Hood
B)
Backguard System
C)
Cooktop
1)
Locate cooktop according to cooktop installation instructions.
2)
Measure distance from counter surface to top of trim on cooktop adding 1/8”
for backguard clearance.
3)
Transfer this measurement to the wall. This will mark the bottom of your
backguard.
4)
From this line measure 30-1/16” up wall to mark top of 30” backguard. This
is the minimum height that bottom of your vent hood can be installed.
5)
Follow vent hood manufacturer’s
installation instructions to install
vent hood.
6)
Follow backguard installation
instructions to install backguard.
7)
Connect gas and electrical
connections and slide cooktop
into position.
In the COMMONWEALTH OF MASSACHUSETTS, GAS CONNECTION MUST
BE PERFORMMED BY A LICENSED PLUMBER OR GAS FITTER.
special instructions for Massachusetts
Fig. 5
Summary of Contents for PSCT364B
